PP530 Tub Chair by Hans Wegner

Green Tub Chair by Hans Wegner
Black Tub Chair by Hans Wegner
The green PP530 Tub Chair by Hans Wegner I saw in the Danish Design Museum.
PP Mobler about it:

Conceived in 1954 the Tub Chair was a pioneering experiment, and it turned out to be the most advanced shell chair design Wegner ever did, as the back of the chair is a complicated double bent shell comprising two individual shapes: One that is bent and one that is both bent and twisted.

Even besides the complexity of the back, the Tub Chair is a unique fusion, where Wegner merge the moulded plywood technique with upholstery and traditional work in solid wood and even adding a metal angle adjustment mechanism for the back. It is one of the most striking and brilliant examples of Wegner’s vision and courage, and still it is a most practical, usable and comfortable chair.

However, the Tub Chair was not technically possible to produce in a rational way within the lifetime of Wegner. As our techniques have developed, PP Møbler has been able to produce this great tribute and introduce this bold design in celebration of the 100 years anniversary of Wegner, one of the greatest designers of all times.

The black one I found at the auction site of Phillips where an early model was sold for UK pound 50,000 in October 2015

The Catalogue about it:

The present lot is one of two known period examples of the ‘Tub’ chair, a model which did not enter into wider production during Hans J. Wegner’s lifetime. The chair seat is composed of two pieces of fabric-covered moulded plywood. It rests on a dramatically angled oak base and is supported by a brass mechanism that allows for adjustment of the back angle. Its complexity prohibited fabrication in greater number, though it was included in the 1954 Cabinetmaker’s Guild exhibition in Copenhagen. The chair is a notable example of Wegner’s explorations into the possibilities of plywood, but ultimately the demands of employing both laminate and solid wood construction concurrently were too great and he chose to focus on the latter.

The design of the ‘Tub’ chair shares the intuitive elegance of Wegner’s other furniture, and references certain features of his most well-known chair designs specifically. While structurally more elaborate, the clamshell-form seat relates to the ‘Peacock’ chair (1947) and the forceful forward movement of the base to the ‘Folding’ chair (1949). The ‘Tub’ most closely anticipates Wegner’s ‘Shell’ chair of 1963. It is notable that even a decade after the introduction of the ‘Tub’, the ‘Shell’ form was still considered too radical for its time. It was following the ‘Shell’ chair designs that Wegner closed the chapter on his experiments with plywood. However by 1989 it was picked for the cover of the catalogue for the exhibition celebrating Wegner’s 77th birthday and has since become one of his most iconic masterpieces. The present chair is consequently a rare illustration of some of his earliest career-defining ideas.

LM92 or Metropolitan Chair by Ejner Larsen & Aksel Bender Madsen

LM92 or Metropolitan Chair by Ejner Larsen & Aksel Bender Madsen

The LM92 or Metropolitan Chair by Ejner Larsen & Aksel Bender Madsen was designed in 1949. Carl Hansen and Son have it in production.

The Metropolitan Chair was designed by the duo Ejner Larsen and Aksel Bender Madsen. With its organic form and high quality of craftsmanship the Metropolitan chair falls within the golden era of furniture history, known as Danish Modern.

Larsen and Bender Madsen designed approximately 300 works, and thus put their clear mark on Danish design over the years. Of these the Metropolitan Chair is considered their most significant.

The chair got its breakthrough at the exhibition The Arts of Denmark at the Metropolitan Museum of Arts in New York in 1960, where the most prominent of Danish design was showcased. It was consequently named the Metropolitan Chair.

Metropolitan Chair is produced in solid oak or walnut and is available in two variants: One fully upholstered in saddle leather (LM92), the other combining a leather-upholstered seat with an exposed veneer back (LM92T).

Black CH 29 or Sawbuck Chair by Hans Wegner

Black CH 29 or Sawbuck Chair by Hans Wegner
CH 29 or Sawbuck Chair by Hans Wegner dates from 1953 and is still produced by Carl Hansen and Son. Photo taken in their Copenhagen show room.

CH468 Oculus Chair by Hans Wegner

Red CH468 Oculus Chair by Hans Wegner

Black CH468 Oculus Chair by Hans Wegner

Hans Wgener designed the Oculus Chair in the sixties. Only few were made in the sixties for special occasions. In regular production by Carl Hansen and Son since 2010.

PP201 Chair and PP58 Chair by Hans Wegner

Bingo, 3 chairs designed by Hans Wegner for for PP Mobler in a row at the Danish Design Museum, The first in the front is the PP201, the one in the middle the PP58 and in the back the PP52. The PP52 I have on a separate photo and hence I shall devote a separate post on the PP52

About the PP201/PP203:

The pp201/pp203 combines the aesthetics of the pp701 Minimal Chair with the construction of the pp66 Chinese Chair thus creating a new expression, where the strict geometrically defined frame construction supports only the most prudent use of those organic shapes so characteristic of Wegner’s work through the 1950’s.

The pp201/pp203 also marks one of the most important milestones in the lifelong close partnership between Hans J. Wegner and PP Møbler. Until 1969, PP Møbler had been more of a free space for Wegner rather than a business partner. Although PP Møbler had produced thousands of frames for the pp19 Teddy Bear Chair, Wegner’s relation to PP Møbler was primarily based on his friendship with the PP family and the craftsmen, and indeed the PP workshop provided the surroundings where he conceived the ideas for many of his prototypes and experiments through the 1960’s and to the end of his career.

In 1969, in addition to designing the pp201/pp203, Wegner also designed the PP logo and encouraged PP Møbler to initiate their own line of products as well as their own sales department. During the next 25 years, Wegner designed all PP Møbler’s sales and marketing material and he placed his best and most cherished new and previous designs at PP Møbler.

pp201’s combined arm- and backrest is made of one piece of solid steam bended wood and one piece of carved solid wood with joint details of wenge.

pp201 has a plaited seat available in either natural colour or black.
pp203 comes with an upholstered seat. (PP Mobler)

About the PP58/PP68:

What is left to do after a long glorious carrier with a long line of design masterpieces acknowledged by the whole world, and a number of significant awards already achieved?

For Hans J. Wegner the answer was obvious: in 1987, 73 years old, he designed the pp58/pp68 as his final basic chair; a genuinely comfortable, practical, strong, durable and affordable chair. Benefitting from a life’s experience with furniture design, he was determined to let this particular design be guided by all he had learnt from his previous works.

Comprising solid wood joined with tenons proved by testing each joint to withstand one ton of pulling strength, the chair is designed to be comfortable in alternate seating positions, making it a delightful experience to be seated for hours. At an affordable price, it will outlast everyday use throughout your life – and your children’s and your grandchildren’s, effectively constituting the essence of sustainability  and not just in terms of ecology, but also in terms of economics.

All in all it is a strong, final contribution from one of the world’s greatest furniture designers. The simple conclusion to an incredible life’s work.

pp58|pp68 is optimized to be practical. The short armrests makes it easy to enter and move around the chair. It fits well underneath the table, and it can also hang from the table top to make cleaning easier. The all solid wood tenon joints have been tested to withstand one ton of pulling strength.

pp58 comes with an upholstered seat.
pp68 has a plaited seat available in either natural colour or black. (PP Mobler)